Samsung Galaxy Camera GC100 Official XXBLL7 Android 4.1.2 Firmware Download

Happy day! Samsung Galaxy Camera is getting an OTA update, it brings your smart camera to XXBLL7 Android 4.1.2 Jelly Bean Rom. If you did not receive a OTA notification for this update, you can click on the check for updates button in the Settings——About device menu. Also we can download and install it directly by Odin.

About Firmware

• PDA: GC100XXBLL7
• CSC: GC100OXABLL7
• Android Version: Android 4.1.2 Jelly Bean
• Date: 2012-12-28
• Regions: Austria, Belgium, France, Germany, Hungary, Italy, Spain, United Kingdom

Firmware Download

• GC100XXBLL7_GC100OXABLL7_BTU.zip

Flash Tool

• Odin3 v3.07

USB Driver

• Samsung USB Driver (Download Directly) or Samsung Kies PC Sync (Such as Samsung Kies_2.3.1.12044_18)

Put Galaxy Camera into Odin Mode

• Set up ADB in your computer
• Connect your Galaxy Camera to your computer using USB cable
• Run cmd and type:
  adb reboot download
• Press Enter key

Install

• Install USB Driver
• Extract Firmware file, you can get .tar file(s)
• Extract Odin file, you can get Odin3 v3.07.exe
• Power off your galaxy camera
• Put your smart camera into Odin Mode
• Connect your device to computer
• Run Odin3 v3.07.exe, you can see the “Added!!” message in Odin
• Select these files from extracted folder in Odin:
       Click on the PDA Button, select file with *code* appearing in its name
       Click on the Phone Button, select file with *modem* in its name, and ignore it if there is no such file
       Click on the CSC Button, select file with *csc* in its name, and ignore it if there is no such file
       Click on the PIT Button, select the .pit file, and ignore it if there is no such file
• Make sure Re-Partition checkbox is selected only if you are using a .pit file in Odin, otherwise ignore it, and don't change any other
• Click on the Start Button in Odin to begin the flashing process
• You will see a PASS message after finished
• You smart camera will automatically reboot
• Done